RX 570 8GB Mining Settings

RX 570 8GB Mining Settings for all the popular and most profitable Cryptocurrencies to mine, you're one-stop page for everything related to your GPU

GPU Release: 18 Apr 2017
Price: N/A


The RX 570 8GB Mining Settings in this article will work for all models. The main difference between models and GPU to GPU is the Silicon Lottery. This means your GPU may perform worst or better based on your luck in the hardware.

Please make sure to view our overclocking basics and benefits guide to avoid any unnecessary damage and risk to your system and most importantly, do NOT mine with stock settings!

RX 570 8GB Mining Overclocks

Absolute Values are most commonly used in Linux-based Mining OS and they usually give more effeciency, while Offset is more common for Windows. N/A or 0 = leave blank.

ETChash Logo
30 MH/s, 135 Watts
ZelHash Logo
14.2 Sol/s, 120 Watts
KawPow Logo
13.5 MH/s, 135 Watts
FiroPow Logo
13.5 MH/s, 135 Watts

RX 570 8GB ETChash Mining Overclocks

  • Base
Expected Results
30 MH/s, 135 Watts
Core Voltage (VDD)
Power Limit
Watts: 140 or Percentage: 0%
Core Clock (CClock)
Absolute: 1100 or Offset: 0
Memory Clock (MClock)
Absolute: 1100 or Offset: 0
Memory Voltage
Fan Speed (%)
70% ± based on your temps
Provided by @Mining Chamber


Compute Mode

To get optimal efficiency and performance on your RX 570 8GB Mining Settings, you need to enable Compute Mode as it will boost your hashrate from 6-9 MH/s to 25-31 MH/s. This also applies on all Radeon 400 and 500 Series.

vBIOS Modding

To get better results with your RX 570 8GB Mining Settings, it is advised to BIOS mod your card as it can give you an extra 3-5 more MH/s. BIOS modding can corrupt your GPU if done incorrectly, so please make sure to follow our guide properly: RX 570 8GB BIOS Modding.

More Information

Power Draw

Wattage draw for Graphics Cards are not accurate in the software so you have to use a wall Watt meter to be able to measure proper power draw.


Not all cards can run at the same settings so if your unlucky and can’t run the settings provided then decrement your memory clock down by 25 or increment your voltage up by 5 until you find a stable point.


Try different drivers if you keep having troubles with instability after trying to troubleshoot your overclocks.

Hot headlinesPoW CryptocurrenciesMining Chamber Updates

They say if you sign up, your rig will never crash 🤷🏽‍♂️