Top 5 PSUs For GPU Mining
When you’re looking for a Power supply as a miner, there are a couple of things that you want to pay close attention to so before we talk about the top 5 options lets cover the basics first so you can understand the reasoning behind the Top 5 PSUs for GPU Mining.
How Much Watts Do You Really Need?
First knowing how much wattage you need. For that you need to keep in mind that GPUs mining use less power than gaming, so you don’t need to look at the TDP. Instead, check how much wattage your GPU uses for mining, a good place to do that will be miningchamber.com you’ll find different GPUs there with how much wattage they use mining a certain algorithm. If you don’t find it here then look in whattomine.com or other resources.
Now add up how much wattage it will be for all the GPUs and then give up to 200 watts for the other parts and if your not using any fans then giving it 100 watts max will be good. So whatever total that comes out to in wattage you want to make sure it does not surpass 80% of whatever PSU your trying to use. So if the total is 850 watts then getting a 1200 watts PSU will be enough.
There is a safety concerns in this because the calculation is based on certain overclocks and undervolts that you need make sure to apply for your GPU and if those settings reset then your in the danger zone because you’ll be pulling a lot more than the 850 watts.
So it is a good practice to get even more wattage but if your using a Linux based mining OS or tested and kept a close eye on your overclocks then this is not much of a problem to you.
The Rating System
Then you have the ratings. The ratings represent the quality of the wiring that is used within the Powersupply. The higher the rating goes the safer and more efficient the PSU becomes. Generally getting Gold and above is completely fine, but if your looking to maximize efficiency you can get platinum or diamond but the numbers are pretty small to notice. So I would recommend getting the best deals price wise when its gold and above.
The Quantity Of The PCIe Cables
One of the most important factors is the amount of PCIE cables that it comes with. As a GPU Miner, you want the most PCIE cables that you can get, also known as VGA. These will help you connect more GPUs with peace of mind. These cables come in 3 different variations. You have single 8 pin, dual 8pin and 8 + 6 pin. The more pins the better so having dual 8 pins is always preferred.
Multiple Methods To Power Your GPUs
There are multiple ways you can utilize the PCIE cables in your GPU Mining rig but almost always you will need splitters. Splitters basically takes in a single 8 pin or 6 pin and gives you 2 in return. Making it easier to effectively power more GPUs and risers.
Here are some quick different methods that you can use to power your GPUs and risers:
Method 1 is for single 8 pin cards. You can use a single 8 pin cable and connect to it either a 6 pin or 8 pin splitter and then from there power the GPU and riser with the 2 8 pins.
Method 2 is for dual 8 pin cards. This will be using a dual 8 pin cable with either a 6-pin or 8-pin splitter to dual 8 pin and it will work with any GPU except the RTX 3090s.
You want to connect the splitter to one of your 8 pins then now you have 3 total 8 pins, 2 for GPU and one for the riser. (you can use the 6 pin part of it only)
Method 3 is also for dual 8 pin cards when your running short on cables, this will only work on gpus that use 150 watts or less for mining out of the wall. You will be using 2 cables of dual 8-pins and 2 splitters to power 3 GPUs. You will have a total of 6x 8-pins and then from there you can do one and a half GPU per PCIE Cable. Spreading the load of 3 GPUs on 2 different cables.
As for the risers you will have to use Molex cables. 2 risers per Molex or you can also add 2 more splitters and power 2 risers with them and then one riser with Molex.
Then finally for the high-power cards that use 250 watts and above while mining, you will need to use 2 full cables for them to avoid overloading your PSU cables.
Don’t power 2 GPUs with one cable unless it’s a GPU that uses less than 80 watts off the wall while mining, like a 1660 TI.
Different Handy Adapters For PSUs
There are different adapters out there that can help you work with your GPU Mining Rig more effectively. Here is the list of the most common ones:
More PSUs Information
So we covered most of the basics you need to know when it comes to PSUs. This topic is very broad so there is a lot more information on them such as wattage limitation and where all the other cables go, so if you want to learn more on that then you can check out my two guides on PSUs:
- Wattage: from 1200 Watts to 2000 Watts
- PCIe Cables: 1x CPU Cable ( 4+4 pin ) and usually 4 to 12 ( 6+2 pin )
depending on the model.
- Voltage: 180-240V 50 – 60 Hz
- Wattage: 850 Watts.
- PCIe Cables: 2x CPU 8 pin (4+4) Cable, (You can use CPU to GPU splitter for one of the CPU cables.
3x PCIe 8 pin (6+2) cables, 4x for the 1000w model.
- Voltage: 100 – 240V, 12A-6A, 47 – 63 Hz.
- Wattage: 1200 Watts.
- PCIe Cables: CPU 2x 8pin (4+4) GPU 6x 8pin (6+2), 2x 6pin.
- Voltage: 100 – 240 VAC, 15A, 50 – 60 Hz.
2. Server Powersupplies (2 options)
- PSUs (2 options)
- 1200 Watt HP 80+ Platinum 110-240V.
- 2400 Watts DELTA 80+ Platinum 200-240V
- Breakout Boards (3 options)
- 16x (6Pin to 8) Ports Board + PICO 24pin ATX (Pico Supported).
- 16x (6Pin to 8) Pin Ports Board (Pico NOT Supported).
- 12x (6Pin to 8) Pin Ports Board (Pico NOT Supported).
As for the PCIe Cables you can buy as many as you want, but keep in mind the number of the connecters the breakout board has.
1. COOLERMASTER (4 options)
- Wattage: 850 Watts.
- PCIe Cables: CPU 1x 4+4 Pin, 1x 8 Pin GPU, 3x 6+2 Pin Cables.
- Voltage: 100 – 240 VAC, 12A-6A, 50 – 60 Hz.
- Wattage: 1000 Watts.
- PCIe Cables: CPU 1x 4+4 Pin, 1x 8 Pin GPU, 4x 6+2 Pin Cables.
- Voltage: 100 – 240 VAC, 13A-7A, 50 – 60 Hz.
- Wattage: 1200 Watts.
- PCIe Cables: CPU 2x 4+4 Pin, GPU 6x 6+2 Pin Cables.
- Voltage: 100 – 240 VAC, 15A-7.5A, 50 – 60 Hz.
- Wattage: 1300 Watts.
- PCIe Cables: CPU 1x 4+4 Pin, 1x 8 Pin GPU, 6x 6+2 Pin Cables.
- Voltage: 100 – 240 VAC, 15A-8A, 50 – 60 Hz.
Hope the Top 5 PSUs for GPU Mining options helped you decide which PSU you need to use. Just keep in mind if any of those are not available, a different brand will work just fine.